Click on an item for information

Industrial Actuators

Karl Dungs
   
Click logo for manufacture site
EM Electric Actuator
  
Dungs EM Electric Industrial Actuator
 

Karl Dungs Actuators are designed to operate dampers, butterfly valves and similar devices. Models are available for a variety of torques from 16 in. lb. to 450 in. lb. and control methods including two-position, position proportioning with slide-wire feedback, potentiometer proportioning and current-to-position proportioning.

All models are UL listed.

Link:
EM Electric Actuator Series


DMA Modulating Actuator Motor
   
Dungs DMA Modulating Actuator Motor
 

The DMA actuator drives from 0° to 90° via a 4 to 20 mA input signal. It can move in any direction and stop anywhere over the entire 90° stroke. The field adjustable stroke is factory set at 90° and the position is factory set at 0°.

Application:
When mounted on the DMK butterfly control valve, the DMA is used to automatically modulate the amount of natural gas, butane, propane and/or air supplied to the burner.

Link:
DMA Modulating Actuator Motor